38# Juice , Energy Drinks Bottle PET Blow Moulding Machine
Technical Parameter
| Items | Unit | Model |
| RiBo-8CR48-2L |
| Molding Spec. | Preform Pitch | mm | 120 |
|
| Preform Heating Pitch | mm | 48 |
| No.of Cav. | cav. | 8 |
| Container Spec. | Max.Container Volume | L | 2 |
|
| Neck Diameter Range | mm | 38 |
| Max.Preform height | mm | 150 |
| Max.Preform diameter | mm | 37.5 |
| Max.Containr Diameter | mm | 114 |
|
| Max.Containr Height | mm | 320 |
|
| ※※Theoretical Output | bph | 14000~8800 |
|
| Power Spec. | Rated Power | KW | 148 |
|
| Power Consumption | KW | 50~70 |
|
| Compressor Spec. | Blowing Pressure | Mpa | 2.8~3.2 |
|
| Air Consuming | m3/min | 10 |
|
| Main Machine Spec. | Size | mm | 8192x3421x3300 |
|
| Weight | Kg | 10200 |
|
| Note: Due to continuous technical development specification would
be improved without prior notice. |
| Special designs correspond to customers needs. |
R series linear full electric PET bottle blow molding machine is a
high speed automatic PET blower designed and developed
with the most advanced bottle blowing technology at present, the
advantages of which can be described as speedy, stable,
simple, general purposed and environmental safe. It is mainly applicable in
blow molding PET containers for water, beverage,
juice, etc. The machine yields abundantly with high efficiency. The capacity of
each cavity has been increased to
2750~2000bph when the bottle size is equal to or less than 0.55L respectively, which can
meet the high-end customer's
requirements. Equipped with preform auto loading system, the machine works fully automatically
with consistent performance
and high speed, without any operator's interference during the whole processes. Accordingly,
chance of contamination can be
reduced manifestly, which assures the quality of products.
This series is applied in making PET bottle for drinking water,
beverages,liquid milk drinks……ect.
